Laser Alignment Newsletter Signup
Screen Printing Products Embroidery Products Heat Transfer Products New Applications About Laser Targeting Systems English
Flat Heat Press System Cap Heat Press System Tips / Instructions Picture Gallery Where to Purchase a System
 
 
Flat Heat Press System
Heat Transfer Flat Press Laser Alignment System

Laser Alignment Guidelines - Laser Targeting Systems

Set your shop up for success! The Heat Press Laser Alignment System will provide your shop with a competitive advantage. The laser guidelines will allow you to quickly produce heat transfer and sublimation items perfectly every time. Whether you are lining up names/numbers on a jersey or placing a transfer a t-shirt, this laser alignment system will help save you time and minimize mistakes.
Build Your System Today

All of our systems are customized to the needs of your shop. You pick the number and type of lasers that will work the best for your needs. Build your custom laser alignment system to have a between two to four lasers mounted on the Heat Transfer Control Panel. You can choose between the following three types of lasers:

Heat Transfer Laser Control Panel
Flat Heat Press Control Panel
Part #: 031HPU

Crosshair Laser Guidelines
Crosshair Laser
Part #: 018C
Line Laser Guidelines
Line Laser
Part #: 015L
Spot Laser Guidelines
Spot Laser
Part #: 071S

Mounting Equipment – Floor Stand (OPTIONAL)

Telescopic Floor Stand for Mounting Manual Control Panel

The Heat Transfer Control Panel can be mounted on the telescopic Floor Stand . The telescopic Floor Stand extends up to approximately six feet six inches (two meters) and is made out of powder coated steel. The triangle base allows the stand to be placed flat against a wall or a table to save space.

Part #: 011UPS

 

The Mounting Bracket and Arm allows you to mount the either the Manual Contorl Panel or Automatic Control Panel to the side of a wall, table or from the ceiling. You can adjust the height of the control by sliding the Mounting Arm through the Bracket and tightening the adjusting bolt.

Part #:003MBA


Mounting Bracket and Arm - Laser Alignment Systems

Power Source
Heat Transfer Control Panel & Power Source

This control panel is wired for each laser to be powered by two standard AAA batteries. The estimated battery life for this system per a laser is 30 hours. Rechargeable batteries are recommended for this system.

Click here for more information on Battery Power – Protect Your Investment.

 
 
 
 
Upcoming Events

- ISS Long Beach (1/20-1/22)
- ISS Orlando (2/17-2/19)
- NNEP Network Ohio (3/9-311)
- ISS Atlantic City (3/17-3/19)
- Detriot Embroidery Extravaganza (April)
- Boston Embroidery Extravaganza (May)
- NBM Ft. Worth (5/4-5/6)
- NBM Indianapolis (6/1-6/3)

 
 

 
 
Press Releases

- SGIA Website Feature
December 1, 2005
- ScreenWeb.com Feature
October 16, 2005
-Embroidery Laser Alignment System
May 3, 2005
-Operations Newsletter
March 2005 - EMB Magazine
-Heat Transfer Alignment System
May 3, 2005
-Screen Printing Alignment System
December 4. 2004

 
 

Specialty Graphic Imaging Association (SGIA)

Lasre Guidelines for Heat Transfer Letters & Numbers _ Laser Guidelines for Appliques
3 Line Lasers ____ 2 Line Lasers

Heat Press Laser Targeting Systems
Lasers on Swing Away Press

Sublimation Laser Alignment Systems
3 Line Lasers used for Sublimation

www.heattransferlasers.com
   

About Us | Screen Printing | Embroidery | Heat Transfer & Sublimination | New Applications | Dealers | Events | Tips | Picture Gallery

1-800-426-9416 | Fax: 760-553-2621 | info@lasertargetingsystems.com | 3081 Crater Drive, Lake Havasu City, AZ 86404